BOSOKO J-Hook Wiper Blades

To install J-hook wiper blades on Bosoko with OEM specifications, start by gathering your tools: new J-hook wiper blades and a towel to protect the windshield. Lift the wiper arm away from the windshield cautiously, as it may be spring-loaded. Place the towel under the arm to prevent scratching if it snaps back. Locate the release mechanism on the old blade, which could be a tab or button. Press it and pull the old blade straight down and away from the arm. Match the connector of the new blade with the arm's size (either 9*7mm or 9*11mm). Slide it into place until you hear a click. Lower the arm gently back onto the windshield. Repeat for the other blade. Remove any protective sheath from the new blades. Test them by spraying washer fluid and running the wipers to ensure smooth, streak-free operation.

To remove J-hook wiper blades from Bosoko, ensure you have a towel to protect the windshield. Lift the wiper arm away from the windshield, taking care as it may be spring-loaded. Place the towel under the arm to safeguard against scratches if it snaps back. Identify the release mechanism on the Bosoko blade. There are two common types: a small plastic clip or a tab near the hook. For the clip, flick the tab upwards to release it, then slide the blade down and off the hook. If there's a tab near the hook, press it down while pulling the blade straight down and away from the arm. Once the clip or tab is released, remove the blade carefully to avoid any damage.